Bag Filter in the field, often likened to bag the heart of bag filter, bag filter dust can handle what kind of gas, mainly used to manufacture also depends on the chemical fiber bag their own conditions. Flue gas temperature conditions in general, only resistant bag to a temperature below 150 ℃, these occasions, polyester, polypropylene, acrylic, nylon and other synthetic fibers can be basic competence. As for the relatively high temperature of gas occasions, such as: chemicals, carbon black (white black) exhaust gas, iron works blast furnace gas, cement kiln exhaust gas, calcium carbide plant tail gas furnace, foundry, steel plant flue gas, asphalt concrete mix asphalt smoke, brick kiln flue gas, coking gas, etc., first, because the flue gas dust resistivity of dust due to the restrictions are not suitable for electrostatic precipitator to collect, can only be collected with a bag or other means; Second, as dust-laden flue gas temperature will be reduced to below 150 ℃ higher investment limit or by on-site venues; Third, because the dust-laden flue gas containing sulfur as an element, dust smoke with acid "dew point" only in the acid gas dust dew point temperature is higher than the filter state separation and other factors, so that there is a need to be able to withstand high temperature chemical fiber used to make filters, the company adopts international advanced standards, with advanced equipment in production of aramid high temperature needle felt filter, according to the different requirements of working conditions, our company can do all kinds of needle felt Kevlar high temperature processing functionality, such as water repellent and oil, PTFE impregnated, coated, coated, etc.. |